EBMX X-9000 V3 Controller
& Wiring Harness (Full Kit)

for Sur-Ron, Talaria, E-Ride Pro, Altis Sigma & More

The all-new EBMX X-9000 V3 Controller Kit is in stock, and shipping now! The EBMX X-9000 V3 controller is a complete redesign of the industry-leading V2 controller. After 18 months of testing and refinement, the X-9000 V3 electric dirt bike controller delivers unmatched performance, thermal efficiency, and plug-and-play compatibility with Sur Ron, Talaria, E-Ride Pro, Atlis Sigma, and other high-performance E-Moto platforms.

Built for serious riders and racers, this is more than the average aftermarket electric dirt bike controller — it’s a fully integrated, highly tunable, maximum performance ecosystem.

What's New with the EBMX X-9000 V3:

30x Infineon MOSFETs for 50kW continuous / 60kW peak power output
6-layer PCB and CNC copper busbars – 30% cooler operation than V2
Slimmer rear profile for better fitment
New square-set plug system to prevent pin damage
Removable harness for easier servicing
Supports 120V builds (no longer limited to 72V)
Integrated IMU with Wheel Lift Assist
EBMX X-Series App: Full throttle, regen, and motor tuning via Bluetooth
Updated SW102T Color Display with customizable metrics

App & Display Integration:

Live tuning: Regen, throttle curve, max amps, motor settings
Load-and-Go Profiles: Choose presets by bike or battery type
Modes: Street / Race, plus 3-level assist & EBMX E-Clutch
Live Metrics: Power output, RPM, temp, speed, distance, regen, etc.

X-9000 V3 Fitment & Compatibility

The EBMX X-9000 V3 controller is plug-and-play compatible with nine electric dirt bike and e-moto platforms, including the Sur Ron Light Bee, Sur Ron Ultra Bee, Talaria XXX and E Ride Pro platforms. Each platform requires its own matched wiring harness, sold separately by bike model.

Platform	Fitment	Harness Note
Sur Ron Light Bee	Plug-and-play	Harness sold separately by variant
Sur Ron Ultra Bee	Plug-and-play	Harness sold separately by variant
Talaria MX3	Plug-and-play	Shared MX3/MX4/MX5 harness
Talaria MX4	Plug-and-play	Shared MX3/MX4/MX5 harness
Talaria MX5	Plug-and-play	Shared MX3/MX4/MX5 harness
Talaria XXX	Plug-and-play	Dedicated XXX harness
E-Ride Pro SS 2.0	Plug-and-play	Requires V3 battery
E-Ride Pro SS 3.0	Plug-and-play	Breaker and non-breaker harness versions available
E-Ride Pro SR	Plug-and-play	Dedicated SR harness
ReRode R1	Plug-and-play	Dedicated R1 harness
QS138 70H / 90H	Plug-and-play	Motor-specific, not bike-specific
79 Bike Falcon S / Pro	Plug-and-play	Dedicated 79 Bike harness
Altis Sigma	Coming soon	Not yet available, don't buy expecting fitment today

V2 harnesses are not compatible with the V3 controller. If you're upgrading from a V2 setup, order the correct V3-specific harness for your bike, not only the controller alone.

The EBMX X-9000 V3 heatsinks are available in multiple colorways: Red, Blue, White, Purple, and Gold (Black included standard). Water-cooled heatsink upgrade available for high-endurance race builds.

Compatible Motors w/ Preloaded Tunes:

OEM Sur Ron / Talaria / E-Ride Pro motors
EBMX XLB-60, XTA-60, XUB-80
KO RS & KO F Spec
QS138 70H / 90H
30+ supported motor profiles out of the box

Full Kit Includes:

EBMX X-9000 V3 Controller
Air-Cooled Heatsink
SW102T Full-Color Display
Thumb Throttle
Bluetooth Module
Mounting Brackets
1–2 Wiring Harness Adapter
IP67-Rated CNC Alloy Housing

X-9000 V3 Specifications:

Spec	Detail
Rated Power	50kW Continuous / 60kW Peak
Voltage	Up to 120V (48–110V Operating)
Phase Current	1000A Continuous / 1600A Burst
Control Protocol	Field-Oriented Control (FOC) – VESC
Firmware	Custom EBMX VESC
IMU Support	Wheel Lift Assist & E-Clutch
Waterproofing	IP67 Rated
Operating Temp	-25°C to 80°C
Warranty	2 Years
Heat Sink Colors	Black (included) / Red / White / Blue/ Purple / Gold

Built for Riders Who Want:

Maximum power + smooth throttle feel
Full adjustability from their phone
Reliable, thermally stable high-performance output
Seamless tuning, no laptop required
Safer wheel control with built-in IMU

EBMX X-9000 V3 Controller: Frequently Asked Questions

Fitment, power output, and setup before you buy.

Q: What makes the X-9000 V3 different from the V2 controller?▼ Tap to expand

A: The V3 is a full redesign, not a firmware update. 30x Infineon MOSFETs push output to 50kW continuous and 60kW peak, and a 6-layer PCB with CNC copper busbars keeps it running 30% cooler than the V2 under the same load. It also drops the V2's voltage ceiling, supporting up to 120V builds instead of topping out at 72V.

Q: Which bikes and motors work with the X-9000 V3?▼ Tap to expand

A: Plug-and-play fitment covers Sur Ron Light Bee and Ultra Bee, Talaria MX3/MX4/MX5 and XXX, E-Ride Pro SS 2.0 and 3.0, E-Ride Pro SR, ReRode R1, QS138 70H/90H, and 79 Bike Falcon S/Pro. Altis Sigma support is coming soon but not live yet. 30+ motor tunes ship preloaded, so most riders won't need to build a custom map from scratch.

Q: How much power does the X-9000 V3 actually put out?▼ Tap to expand

A: 50kW continuous, 60kW peak, with 1000A of continuous phase current and up to 1600A in burst. Field-Oriented Control keeps that power smooth instead of jerky, which matters more than the peak number once you're actually on the throttle.

Q: Can I use my V2 wiring harness with the V3 controller?▼ Tap to expand

A: No. The V3 uses a new square-set plug system built to stop pin damage, and it isn't backward compatible with V2 harnesses. If you're upgrading from a V2 setup, budget for the correct V3-specific harness for your bike, not just the controller.

Q: What does Wheel Lift Assist do?▼ Tap to expand

A: An integrated IMU reads the bike's orientation in real time to enable Wheel Lift Assist. It works alongside Street and Race modes, three-level assist settings, and EBMX E-Clutch, all tunable through the EBMX X-Series app over Bluetooth. If you searched "wheelie control" for this controller, this is the feature you're after.

Q: How does the X-9000 V3 compare to other high-power controllers?▼ Tap to expand

A: The X-9000 V3 tops out at 50kW continuous / 60kW peak with 120V support, ahead of most kits built for lower-voltage platforms. If you're cross-shopping high-power controllers, compare continuous power and voltage ceiling, not just the peak number printed on the box.

Q: What's included in the full kit?▼ Tap to expand

A: The controller, an air-cooled heatsink, SW102T full-color display, thumb throttle, Bluetooth module, mounting brackets, and a wiring harness adapter matched to your bike. IP67-rated housing comes standard, and a water-cooled heatsink is available for high-endurance race builds.

Q: Is the X-9000 V3 in stock right now?▼ Tap to expand

A: Availability moves fast on this controller. Check the buy box above for real-time stock by color and harness, or contact us if you don't see the combo you need and we'll help you find it.

Q: Do I need the display, or can I run the controller without one?▼ Tap to expand

A: The SW102T full-color display comes standard in the full kit and shows motor temp, controller temp, speed, and live tuning metrics. Running without it is possible but not recommended, since you'd lose visibility into thermal load exactly when you're pushing 50kW.

Q: What's the warranty on the X-9000 V3?▼ Tap to expand

A: Two years, handled directly through REV Rides as an authorized EBMX dealer. That covers the controller electronics under normal use, not damage from incompatible harness wiring or unsupported motor builds outside the 30+ preloaded tunes.

Black Friday: EMBX + E Ride Pro Deal

E Ride Pro S: 17" 72V 8KW 30AH | Electric Dirt Bike for Kids & Adults

E Ride Pro SR | 72V 25KW 50AH | Fastest Electric Dirt Bike

E Ride Pro S: 16" Fat Tire | 72V 8KW 30AH 50MPH | Electric Dirt Bike (Limited Edition)

E Ride Pro SS 2.0

EBMX X-9000 V3 Controller & Wiring Harness (Full Kit) for Sur-Ron, Talaria, E-Ride Pro, Altis Sigma